Check that the touchscreen is working correctly

🎯 Objective

Ensure that the SPASH screens are working correctly and that the interface is fully operational.

---

📍 Verification steps

1. Check the screen power-on

• The screen should turn on automatically
• Check that it remains powered without interruption

---

2. Check the SPASH interface

• The SPASH interface should appear after startup
• Check that the display is complete and properly loaded

---

3. Test the touchscreen

Ensure that the interaction works correctly:

• Navigate through the menus
• Test several touch actions
• Start a session from the screen

---

4. Test in real conditions

Carry out a full usage test:

• Check that all actions respond correctly
• Control the smoothness of navigation
• Ensure that information is displayed correctly

---

⚠️ Common issues

White screen

Likely cause:

• Network connection problem

Recommended actions:

• Check the internet connection
• Check the network connections of the BOX Recorder

---

Touchscreen not working

Likely cause:

• Touch film poorly positioned or disconnected

Recommended actions:

• Check the condition and connection of the touch film
• Restart the screen if necessary

---

👁️ Expected result

After verification:

• The screen turns on automatically
• The SPASH interface is visible
• The touchscreen works correctly
• Actions respond without latency

---

💡 Tips

• Perform a quick test every day before opening.
• Regularly clean the screen to maintain good touch responsiveness.