Check the SPASH system network connection

🎯 Objective

Ensure that the SPASH system has a functional network connection to guarantee the proper operation of the equipment and sessions.

---

📍 Verification steps

1. Check the connections

Make sure the network is properly connected:

• The internet cable must be plugged into the WAN port of the BOX Recorder

---

2. Check the network indicators

Check the status of the indicator lights:

• The network LEDs must be lit and active
• Lights that are off may indicate a lack of connection

---

3. Check the SPASH WiFi

Confirm that the local network is available:

• The SPASH_XXX network must be visible from a smartphone or connected device

---

4. Test the system

Perform a functional test:

1. Start a test session
2. Check that the system is working properly:
   • match start
   • screen display
   • availability of features

---

⚠️ In case of problems

If the connection is not working properly:

• Check that the site internet box is operational
• Check the network cables and their connections
• Restart the BOX Recorder

---

👁️ Expected result

After verification:

• The network connection is active
• The SPASH WiFi is visible
• The equipment communicates correctly
• Sessions can be launched without interruption

---

💡 Tips

• Regularly check the network before the site opens.
• In case of internet outage, wait for full restoration before restarting tests.